Assembly; Before First Use; Machine Preparation; Installing The Water Filter - Breville Barista Touch BES880 Instruction Book

Assembly

BEFORE FIRST USE

Machine Preparation

Remove and discard all labels and packaging
materials attached to your espresso machine.
Ensure you have removed all parts and
accessories before discarding the packaging.
Remove the packaging and the plastics bags
containing the water filter and water filter
holder. Clean parts and accessories (water tank,
portafilter, filter basket, jug) using warm water
and a gentle dish washing liquid. Rinse well
then dry thoroughly.

INSTALLING THE WATER FILTER

• Remove the water filter and water filter holder
from the plastic bag.
• Soak the filter in cold water for 5 minutes.
• Wash the filter holder with cold water.
• Set the reminder for next month of
replacement. We recommend to replace the
filter after 3 months.
10
BES880BSS_USC_IB_C17.indd 10
• Insert the filter into the two parts of the filter
holder.
• To install the assembled filter holder into the
water tank, align the base of the filter holder
with the adapter inside the water tank.
Push down to lock into place.
• Fill the water tank with cold water before
sliding back into position at the back of the
machine and locking into place.
NOTE
If you replace the filter every 3 months or
10.6 USgal / 40L use, you don't have to descale
the machine. Filter can be purchased at
Breville webpage.
NOTE
DO NOT use highly filtered, demineralised or
distilled water in this machine. This may affect
the taste of the coffee.
26/7/17 9:50 am