Appradio Mode; Appradio Mode Compatibility; Using Appradio Mode; Starting Procedure - Pioneer AVIC-5201NEX Operation Manual

AppRadio Mode

Displays the launcher
application screen.
Displays the previous screen.
Displays the current source.
Displays the menu screen.
p Press the button twice to hide the App control side bar.
Press the button twice again to display it again.
and are not available depending on the type of
p
device.
WARNING
Certain uses of an iPhone or a smartphone may not be legal
while driving in your jurisdiction, so you must be aware of and
obey any such restrictions.
If in doubt as to a particular function, only perform it while the
car is parked.
No feature should be used unless it is safe to do so under the
driving conditions you are experiencing.

AppRadio Mode Compatibility

p AppRadio Mode is only available on an iPhone.
iPhone models
 iPhone 4, 4s, 5, 5c, 5s, 6, 6 Plus
 iPod touch (4th, 5th generation)
Smartphone (Android) models
46
 For details about Android device compatibility with this
product, refer to the information on our website.

Using AppRadio Mode

You can control applications for an iPhone or a smartphone
directly from the screen (AppRadio Mode).
In AppRadio Mode, you can operate applications with finger
gestures such as tapping, dragging, scrolling or flicking on the
screen of this product.
Important
 To use AppRadio Mode, install the AppRadio app on the
iPhone or smartphone in advance. For details about the
AppRadio app, visit the following site:
For U.S.A.
http://www.pioneerelectronics.com/AppRadioMode
For Canada
http://www.pioneerelectronics.ca/AppRadioMode

Be sure to read Using app-based connected content before
you perform this operation.
 Refer to Using app-based connected content on page 84
 Content and functionality of compatible applications are
the responsibility of the App providers.

In AppRadio Mode, usage is limited while driving, with
availability of functions and content determined by the
App providers.

AppRadio Mode allows access to applications other
than those listed, subject to limitations while driving.
 PIONEER IS NOT RESPONSIBLE AND DISCLAIMS
LIABILITY FOR THIRD PARTY (NON-PIONEER) APPS
AND CONTENT, INCLUDING WITHOUT LIMITATION ANY
INACCURACIES OR INCOMPLETE INFORMATION.
p In this chapter, iPhone and iPod touch will be referred to as
"iPhone".
p The compatible finger gestures vary depending on the
application for an iPhone or a smartphone.
p Even though an application is not compatible with
AppRadio Mode, depending on the application an image
may be displayed. But you can not operate the application.

Starting procedure

When connecting an iPhone or a smartphone to this product,
select the method for connecting your device. Settings are
required according to the connected device.
 Refer to Setup for iPod / iPhone or smartphone on page 33
p Touch the desired application icon after the AppRadio app is
launched.
After the desired application is launched, the application
operation screen appears.
p If you connect your device while an AppRadio Mode-
compatible application is already running, the application
operation screen will appear on this product.
p Press the button to go back to the top menu screen.
For iPhone users
p When you use an iPhone with a Lightning connector, con-
nect the iPhone to this product via Bluetooth wireless
technology and unlock the iPhone in advance.
 Refer to Registering your Bluetooth devices on page 30
1 Connect your iPhone.
 Refer to the Installation Manual.
2 Press the button.
3 Touch [APPS].
p When you use an iPhone with a 30-pin connector, messages
appear on the screen of this product and your iPhone.
Proceed to the next step.
p When you use an iPhone with a Lightning connector, the
AppRadio app is launched, and the AppRadio Mode
screen (Application menu screen) appears after this step. In
such a case, the following steps are not required.
4 Use your iPhone to launch the application.
The AppRadio app is launched.
5 Touch [OK] on the screen of this product.
The AppRadio Mode screen (Application menu screen)
appears.
Using the keyboard (for iPhone
users)
When you tap the text input area of an application for iPhone,
a keyboard will be displayed on the screen. You can input the
desired text directly from this product.
p This function may not be available depending on your
iPhone.
p This function is only available in AppRadio Mode on the
iPhone.
CAUTION
For your safety, the keyboard functionality is only available
when the vehicle is stopped and the parking brake is engaged.
1 Set the keyboard language.