Camera Modes - GoPro HERO3 User Manual

UsInG yoUr Hero3: caMera MoDes
VIDEO
To take a video, verify camera is in Video mode. If
repeatedly until it appears. Default video setting is 960p-30 fps (frames per
second) for NTSC.
The LCD screen displays
and fps, number of video(s) stored on the memory card, balance of
time remaining on card before full and battery capacity.
To start recording:
Press and release . Camera emits one beep and red LED Indicator Lights
flash while recording.
To stop recording:
Press and release . Red LED Indicator Light flash three times and camera
emits three beeps to indicate recording has stopped.
Camera automatically stops recording when memory card is full or battery is
out of power. Video is saved before the camera powers off.
Activate One Button mode to have camera automatically begin
recording when powered ON. To stop recording and keep camera
PRO on, press and hold for two seconds. To stop recording and turn
TIP:
camera off, press and hold
‣ See One Button mode for more information.
12
HERO3_UM_silver_Edition_ENG_MASTER.indd 12-13
is not showing, press
, FOV (field of view), video resolution
for two seconds.
UsInG yoUr Hero3: caMera MoDes
PHOTO
To take a photo, verify camera is in Photo mode. If
repeatedly until it appears. Default photo size is 11 MP Wide.
The LCD screen displays , FOV, photo resolution size (MP),
number of photos stored on memory card, number of photos that
can be taken before full and battery capacity.
To take a photo:
Press and release . Camera beeps one time and red LED Indicator Lights flash.
not showing, press
13
9/19/12 1:01 PM