Changing The Monitor Settings; Changing The Monitor Settings With The Buttons Of The Control Panel - Fujitsu X23T-1 MHL Operating Manual

Operation

Changing the monitor settings

When putting the monitor into operation for the first time, the screen display should
be optimally adapted to the display adapter used.
Changing the monitor settings with the buttons
of the control panel
The buttons of the control panel have two functions. When the OSD menu is
active, the current meaning of the buttons is shown directly over the buttons
on the edge of the screen (softkeys). With the OSD menu not activated,
you can make the following settings directly:
1 = Buttons for the OSD menu (On
Screen Display)
Select OSD language
After the first power-on of the monitor, the selection screen for the language is displayed:
► Press the /
► Press the
MENU
After selecting the OSD language for the first time, you can change
it at any time in the OSD.
Performing auto-adjustment of the monitor (for VGA input only)
► Press the
AUTO
The Auto Processing message appears
Picture quality and position are set to optimum values for your system.
22
INPUT
1
or the button to select the required language.
INPUT
/ button to confirm your entries.
button for about 1 second.
2 3
2 = ON/OFF button
3 = Power supply indicator
Fujitsu