Inlet Thermistor - GE GFDR485GF Technical Service Manual

Inlet Thermistor

See Inlet Thermistor Location on page 19.
Inlet Thermistor Chart
Temperature
50.0°F
70.7°F
75.2°F
80.6°F
85.1°F
90.5°F
95.9°F
100.4°F
105.8°F
110.3°F
115.7°F
120.2°F
150.8°F
200.3°F
Inlet Thermistor Removal
1. Disconnect power from the unit.
2. Remove the control panel.
See Control Panel Removal on page 20.
3. Remove the top panel.
See Top Panel Removal on page 24.
4. Remove the rear panel.
See Rear Panel Removal on page 26.
5. Remove the inlet thermistor wires.
6. Remove the 1/4 in. hex screws that hold the inlet
thermistor to the rear duct.
Outlet Thermistor
Resistance
See Outlet Thermistor Location on page 17.
50.0°F
69.8°F
75.2°F
80.6°F
86.0°F
89.6°F
95.0°F
100.4°F
105.8°F
111.2°F
116.6°F
120.2°F
149.0°F
199.4°F
Outlet Thermistor Removal
1. Disconnect power from the unit.
2. Remove the drum.
3. Remove the outlet thermistor wires.
4. Remove the two 1/4 in. hex screws that hold the
43
Outlet Thermistor Chart
Temperature
See Drum Removal on page 35.
outlet thermistor to the blower housing.
Resistance