Tone Sequences (Dtmf); Using Contacts - Siemens EF81 User Manual

of EF81 KESTREL FCC us-en, (31.01.2006, 10:49)
left page (46)
46 Calling
Frame rate
White
balance
Flicker
adjustment
Send picture/
Send video
Full/split screen
Select the video presentation on
your display. You have the following
options:
Them fullscreen
The video of the other party is shown
in full screen mode.
Splitscr. -- me sm.
The video of the other party is shown
in full screen mode and your video is
shown in an additional small frame.
Splitscr. -- me lg.
Your video is shown in full screen
mode and the video of the other
party is shown in an additional
small frame.
Me fullscreen
Your video is shown in full screen
mode.
Adjust how many frames
per second the camera will
capture.
Adjust the sensitivity to
light.
Adjust the sensitivity to in-
door lightening flicker rate.
Select a picture/video from
My stuff and show it to the
person on the other end of
the line.

Tone sequences (DTMF)

(Only if the clamshell is open)
You can enter control codes (num-
bers) for remote access to an auto-
matic answering machine while an-
other connection exists. These inputs
are transmitted directly as
DTMFcodes (control codes).
§Options§ Open menu.
DTMF Select.
Enter digits and confirm
J
C
with

Using Contacts

Store numbers and control codes
(DTMF codes) in Contacts in the
same way as a normal entry.
J
Enter number.
0
Press until a "+" appears
in the display (wait for
the connection to be
KTestablished).
Enter DTMF codes
J
(numbers).
0
If necessary, wait again
for three seconds at a
time for the receiver to
process the entries safely.
J
Enter a name.
Store entry.
§Save§
You may also store just the DTMF
codes (numbers) and then send
them during the call.
.