JVC TH-M45 Service Manual page 26

3.2.15 Taking out the disc in the play mode
(See Fig.39 to 42)
Reference:
Refer to "Removing the tray assemblies".
(1) From the topside of the DVD mechanism assembly, re-
move the top cover.
(2) Unlock the tray assemblies and draw out the tray assem-
blies toward the front.
(3) From the top side of the DVD mechanism assembly, turn
the gear 1 clockwise to move the lifter assembly upward.
(See Fig.39.)
(4) Turn the gear 2 clockwise to move the sub tray remaining
inside the lifter assembly toward the front, then pull out.
(See Fig.39.)
(5) Take out the disc on the sub tray. (See Fig.40.)
(6) After clearing away the disc, insert the sub tray into the
main tray. (See Fig.41.)
Caution:
When reattaching the sub tray, move the tray stopper on
the bottom of the main tray in the direction of the arrow
to lock the sub tray certainly. (See Figs.41 and 42.)
(7) Push the tray assembly toward the body and reattach.
Gear 2
1-26 (No.MB033)
Tray assemblies
Gear 1
Sub tray
Fig.39
Tray assembly
Fig.40
Tray stopper
Sub tray
Fig.41
Fig.42
Disc
Sub tray
Main tray
Tray stooper