Table of Contents
Advertisement
Chapter 3 - Home Gateway Utilities
Printer Setup Wizard
The wizard will explore all available SpaceLink Dual-Band Home Gateways
and model information of the printers attached to them in your local network.
(1) If you already have your printer installed
on your printer port (LPT1), it will make
this setup process much easier. See
next page for instructions. Run the
Printer Setup Wizard from the Windows
Start menu.
(3) This setup wizard will change your
default printer to use "Remote Port"
which is serviced by the SpaceLink
Dual-Band Home Gateway.
40
ASUS SpaceLink 802.11g Access Point
(2) If the printer is found, the name of the
printer will be shown on this screen.
Note: If there is an
error communicating
with the printer, you
will get this message.
Make sure that the printer is ON, ready, and
connected. Click Back and Next.
(4) Click Done when setup is complete.
Advertisement
Table of Contents
