Chapter 3 - Home Gateway Utilities
Printer Setup Wizard
This utility helps you setup your computers to utilize the printer server
function of the SpaceLink Dual-Band Home Gateway.
Add Printer Wizard
You should add your printer to your computer to simplify the SpaceLink 802.11g
Access PointPrinter Setup Wizard. If you run the "Printer Setup Wizard" without
your printer driver installed, it will direct you to the "Add Printer Wizard".
(1) Run the "Add Printer Wizard" from Start
| Printers and Faxes | Add Printer.
(3) Choose "Local printer attached to this
computer".
38
ASUS SpaceLink 802.11g Access Point
(2) Choose "Install by the Add Printer
Wizard".
(4) Choose "Remote Port (Printer Sharing
Port)". If this is not available, select LPT1.