JVC KD-DV6101 Service Manual page 8

3.1.3 Removing the front chassis assembly
(See Figs.3 and 4)
• Remove the front panel assembly and bottom cover.
(1) From the front side of the main body, remove the two
screws A attaching the front chassis assembly. (See
Fig.3.)
(2) From the both sides of the main body, remove the two
screws B attaching the front chassis assembly. (See
Fig.4.)
(3) Release the two joints d and two joints e. (See Fig.4.)
3.1.4 Removing the side heat sink
(See Fig.5)
Reference:
Remove the front panel and front chassis assemblies as re-
quired.
From the left side of the main body, remove the two screws C and
three screws D attaching the side heat sink.
1-8 (No.MA154)
Front chassis assembly
A
Fig.3
d
B B
d
Front chassis assembly
Fig.4
Side heat sink
D
Fig.5
e
e
C