Remove the bulb by pulling and
replace.
Tail light/Brake light 1
Turn-signal light 2
Version with LED
Only turn signal light bulb can be
replaced.
Remove the bulb socket from the
light assembly by turning it
anticlockwise.
Remove the turn signal light bulb
from the socket by pulling it
straight out.
Replace bulb.
Attaching the light assembly
1. Attach the bulb carrier to the light
assembly and secure with the
three screws.
Vehicle care
2. Attach the light assembly to the
vehicle body as shown in the
illustration and secure with the
two screws.
187