184
Vehicle care
3. Remove the bulb from the plug
connector by pulling.
4. Replace the bulb and connect it to
the plug connector.
5. Insert and push the bulb holder
into the reflector housing by
setting the lug into position.
6. Fit the cap and rotate clockwise.
Turn signal light
1. Rotate the cap (1) anticlockwise
and remove it.
2. Rotate the lower bulb holder
anticlockwise to disengage.
Withdraw the bulb holder from the
reflector housing.
3. Press latch and remove the bulb
from the bulb holder.
4. Replace the bulb and attach it to
the bulb holder.
5. Insert the bulb holder into the
reflector housing and rotate
clockwise.
6. Fit the cap and rotate clockwise.
Low beam
1. Rotate the cap (2) anticlockwise
and remove it.