Ils Capture - Honeywell KAP 140 Installation Manual

VOR/LOC/GPS capture:
The autopilot captured the LOC/VOR/GPS.
6. Press APR button again and the autopilot will return
to the ROL mode.

ILS capture:

After capturing the localizer the autopilot will
annunciate GS ARM and the glideslope is
automatically armed.
The autopilot is following the localizer. When the
glideslope signal is at midscale, current Vertical Mode
is automatically disengaged and the glideslope (GS) is
captured
The autopilot will make pitch and bank changes as
necessary to maintain localizer and glideslope.
Note: GS won't be captured if the LOC needle is
deflected more than 3 dots in either left or right
direction.
6. Press AP to disengage the autopilot and cancel APR
mode.
Note: In this installation the Heading Bug is supplying
the LOC reference signal to the autopilot Therefore,
Heading Bug must correspond with published LOC
course.
18