Table of Contents
Advertisement
Resume data lost
Problem
Although the resume function had been set to ON, no
resume data has been retained since the BHT was not
normally turned off and then left without the battery
cartridge loaded or with the discharged battery
cartridge loaded.
The BHT displays this error message for three
seconds and automatically runs the execution
program from the point of start-up.
Error in System Mode settings
Problem
Your settings made in System Mode contain an error.
If this error occurs, the System Mode settings
revert to the factory defaults.
After displaying this error message for three
seconds, the BHT may start a user program
other than the preset auto-start execution
program or display the message "No execution
program loaded. Contact your administrator." If
this error occurs, be sure to contact your system
administrator.
Solution
Contact your system administrator.
System down error
Problem
An error has occurred during execution of System
Program.
If this error occurs, the BHT beeps five times
(for 0.1 second per beep).
Solution
Unload and reload the battery cartridge, then turn the
BHT on.
If this error occurs frequently, contact your system
administrator.
25
Advertisement
Table of Contents
