Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Datavideo AM-100
Summary of Contents for Datavideo AM-100
- Page 1 AUDIO MIXER AM-100 Instruction manual...
-
Page 2: Table Of Contents
Datavideo Technologies will try to give correct, complete and suitable information. However, Datavideo Technologies cannot exclude that some information in this manual, from time to time, may not be correct or may be incomplete. This manual may contain typing errors, omissions or incorrect information. -
Page 3: Fcc Compliance Statement
AC adapter. If you are not sure of the type of power available, consult your Datavideo dealer or your local power company. 8. Do not allow anything to rest on the power cord. Do not locate this unit where the power cord will be walked on, rolled over, or otherwise stressed. -
Page 4: Warranty
The product warranty period beings on the purchase date. If the purchase date is unknown, • the product warranty period begins on the thirtieth day after shipment from a Datavideo office. Damage caused by accident, misuse, unauthorized repairs, sand, grit or water is not covered •... -
Page 5: Disposal
Disposal For EU Customers only - WEEE Marking This symbol on the product or on its packaging indicates that this product must not be disposed of with your other household waste. Instead, it is your responsibility to dispose of your waste equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment. -
Page 6: Product Features
• Supports both Line or Microphone with 48v Phantom power • Fifth auxiliary channel can be used as line or for daisy chaining with other AM-100 (upto 12 • channels) When used with SE-900 & MS-900 the AM-100 provides synchronized audio follow video using •... - Page 7 Audio Input Source Level Controls This section of the AM-100 controls which audio input channel (CH1~CH4) will be sent to the Audio Bus and its associated Fader. This row of audio channel selection buttons has LEDs built in to show which input channel is active.
-
Page 8: Rear Panel
2 channels of XLR Balanced Audio output. AUX Audio Input Mix input for background music or daisy chaining AM-100 units together. To daisy chain units together, take the AUDIO OUT pair from the first unit and connect these to the AUX IN on the second unit. -
Page 9: A+V (Audio-Follow-Video)
Audio Inputs and Levels Analogue audio comes into the AM-100 through the XLR connectors on the rear panel (see above diagram). The AM-100 supports four XLR Balanced Audio Input channels. -
Page 10: Tally Input Connector (A+V Feature)
Pins 4 / 9 / 14 Example Cascade Setup It is possible to cascade or daisy chain several AM-100 units together. This allows more audio sources to be added to the set up and provided at the final mixed output. To daisy chain units together take the AUDIO OUT pair from the first unit and connect these to the AUX IN on the second unit. -
Page 11: Specifications
Specifications Audio Input Parameter Specifications Limit Units Conditions/Comments MIC/Lin Connectors (CH1~CH4) 3Pin XLR Female Pin2=(+) Pin3=(-) Pin1=GND Mic/Lin Input Impedance 3K/5.5K Ω Mic Gain Range off to +80 ±1.5 Audio source GAIN (knob) Line Gain Range off to +20 ±1.5 Audio source GAIN (knob) Signal to noise ratio @1KHz, 0dB (Lin IN) -
Page 12: Service & Support
Service & Support It is our goal to make owning and using Datavideo products a satisfying experience. Our support staff is available to assist you to set up and operate your system. Contact your local office for specific support requests. Plus, DATAVIDEO WORLDWIDE OFFICES please visit www.datavideo.com to access our FAQ section.