Setting up the VMX 100
Charging the battery in the headset
If you charge the battery for the first time, allow charging for
at least 4 hours without interruption.
Later, 2.5 hours suffice to fully charge the battery.
To charge the battery in the headset:
Take off the headset and close the
microphone boom
The headset is switched off.
Connect the USB charging cable to
the headset's socket for power
²
supply
Connect the USB plug of the USB
charging cable to:
• either the USB socket of the VMX 100 power supply
• or the USB socket of the VMX 100 car charger unit (only
VMX 100 3in1)
• or a USB socket of a computer.
Connect the power supply or the car charger unit, respec-
tively, to the appropriate power outlet.
If the battery was completely drained, the LED
red in the beginning of the charging process. During
charging, the LED
plete, the LED
14
³
.
.
´
´
lights blue.
lights red. When charging is com-
²
´
flashes
³