Set System Time - TP-Link Archer MR400 User Manual

Chapter 12

12. 1. Set System Time

System time is the time displayed while the router is running. The system time you
configure here will be used for other time-based functions like Parental Controls and
Wireless Schedule. You can manually set how to get the system time.
Follow the steps below to set your system time.
1. Visit http://tplinkmodem.net,
2. Go to Advanced
3. Configure the system time using the following methods :
Manually - Select your time zone and enter your local time.
Get from PC - Click this button if you want to use the current managing PC's time.
Get GMT - Click this button if you want to get time from the internet. Make sure your
router can access the internet before you select this way to get system time.
4. Click Save to make your settings effective.
5. After setting the system time, you can set
needs. Tick the checkbox to enable
then click Save to make the settings effective.
and log in with the password you set for the router.
> System Tools > Time Settings
Daylight
Administrate Your Network
page.
Daylight Saving time according to your
Saving, set the start and end time and
65