Specific Safety Instructions - Stanley PG6133 Instruction Manual

38cc 40cm
Table of Contents

Advertisement

SPECIFIC SAFETY INSTRUCTIONS

WARNING: Do not use the chainsaw in areas where
there is a risk of explosion or fire from combustible
materials. The sparks possibly caused when using
this chainsaw may ignite combustible materials as well as
flammable liquids, paint, varnish, petrol, flammable gases and
dust of an explosive nature. As a precaution it is recommended
that you consult an expert on a suitable fire extinguisher and
its use. Ensure that the work area is kept clear of combustible
materials.
WARNING: Do not use the chainsaw indoors or in
confined spaces where exhaust gases, smoke or fumes
could reach dangerous concentrations.
Always use the chainsaw in an open well
ventilated area.
Ensure chainsaw is fully assembled before use.
Unit will become hot during use. Please keep chainsaw at
least one metre (1m) away from buildings, other equipment,
pedestrian areas or flammable materials.
Never pull the re-coil starter once the chainsaw engine
has started. Any damage caused will not be covered by
warranty.
Ensure the chainsaw has stopped before servicing, or
lubricating etc.
Do not attempt to modify the chainsaw, guards or the
supplied accessories in any way.
Do not touch the exhaust. This can become very hot during
operation and can cause serious burns.
Always check the chainsaw for damaged parts or fuel leaks,
ensure these are fixed before using it.
Never refuel while smoking or in the vicinity of
an open flame.
Always wear safety eye wear, ear and breathing protection
when operating or refuelling the chainsaw.
To avoid a fire if you spill fuel while refuelling, clean up
before starting the chainsaw.
Your chainsaw is factory set, NEVER attempt to speed it up
as this could endanger the user and damage the chainsaw.
If the chainsaw makes an unfamiliar sound or vibrates
excessively, switch the chainsaw 'OFF' immediately.
Investigate the possible cause or consult your authorised
service agent.
If chain brake does not operate do not use chainsaw and
have it serviced by your authorised service agent.
Never use coolant in the chainsaw as damage may occur.
Never transport the chainsaw with fuel in the tank. ALWAYS
empty the fuel tank.
Do not tamper or alter any parts as this may cause personal
injury or damage the chainsaw.
Never point chainsaw at people or animals.
Never spray the chainsaw.
Never operate the chainsaw without chain bar oil, any
damage caused will not be covered by warranty.
Bystanders or people watching must be at least 10m away
from operating the chainsaw.
10

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents