Connecting The Cooler - Dometic CFX75DZW Operating Manual

Operation
7.3

Connecting the cooler

Connecting to a battery (vehicle or boat)
The cooler can be operated with 12 V
A
NOTICE! Danger of damage!
Disconnect the cooler and other consumer units from the battery before
you connect the battery to a quick charging device.
Overvoltage can damage the electronics of the device.
For safety reasons the cooler is equipped with an electronic system to prevent
polarity reversal. This protects the cooler against short-circuiting when connecting to
a battery.
Using the fused DC plug
A
NOTICE! Danger of damage!
• For protection of the device the DC cable supplied includes a fuse
inside the plug. Do not remove the fused DC plug.
Only use the DC cable supplied.
➤ Plug the DC connection cable (fig. 1 2, page 7) into the DC voltage socket of
the cooler (fig. 4 5, page 12).
➤ Connect the connection cable to the DC power outlet.
16
g g
or 24 V .
CFX75DZW, CFX95DZW
EN