Remote Control Buttons - Philips VR620CAT Owner's Manual

20 Remote Control Buttons

Press to turn on or off the VCR, TV, Cable Box, or Direct Broadcast
System. (You must first press the VCR, TV, or CBL/DBS button.)
Press to access the VCR menu or some TV menus.
Press to select channels at the VCR, TV, Cable Box, or Direct Broadcast
System; use to set up VCR features (such as the clock).
Enter channel numbers as a two-digit number for the quickest results. For
example, to select channel 6, press 0,6. If you only press the Number 6 but-
ton, channel 6 will appear after a brief delay. (There also may be a brief delay
when you select channels 10, 11, and 12.) To select channels 100 and above,
enter channel numbers as a three-digit number. For example, to select
Enter channel numbers as a two-digit number for the quickest results. You
may only select channels 2-69. For example, to select channel 5, press 0,5. If
you only press the Number 5 button, channel 5 will appear after a brief delay.
Press to memorize a tape position at which the real-time counter was set
Press once to start a recording. Details are on page 27. Or, press repeated-
ly to start a One-Touch Recording. Details are on page 29.
Press to play a tape; press to release Slow, Search, or Still mode and return
to normal playback. Details are on page 38. Press to select an item in the
Press to eliminate the TV's sound. Press again to restore the volume.
If you mute the volume, pressing the VOL(ume) o button also will restore
Press to operate the VCR with the remote control.
Press to select the recording speed (SP or SLP). Details are on
During tape playback, press to view the picture in slow motion.
Press again to resume normal playback. Details are on page 38.
While recording, press to temporarily stop the recording (pause). Press a
second time to resume normal recording. Details are on page 27. You can
Or, press during tape playback to freeze the picture. Press again to resume
• Press the VCR button before pressing VCR feature buttons; press the TV button before pressing TV feature but-
tons; press the CBL/DBS button before pressing Cable Box/Direct Broadcast System feature buttons.
• Buttons that are shaded in the illustration will glow for some time after exposure to direct light.
• Buttons with a shaded description may also operate features of your TV, Cable Box, or Direct Broadcast System.
POWER Button
Press to eject the tape.
Number Buttons
channel 117, press 1, 1, 7.
Antenna Users
MEMORY Button
to 0:00:00. Details are on page 36.
REC(ord)/OTR Button
PLAY/o Button
VCR's on-screen menu or some TV menus.
VOL(ume)
Press to adjust the TV's volume.
PAUSE/STILL Button
not pause a One-Touch Recording.
playback. Details are on page 38.
Helpful Hints
EJECT Button
MENU Button
Cable Users
MUTE Button
the volume.
VCR Button
SPEED Button
pages 32 and 48.
SLOW Button
o/p Buttons
EJECT
POWER
MENU STATUS/EXIT CLEAR
1 2 3
4 5 6
7 8 9
MEMORY ALT.CH
0
REC
PAUSE
/OTR /STILL
PLAY
REW F.FWD
STOP
CH. VOL.
MUTE
VCR TV CBL/DBS
SPEED TIME SEARCH
VCR/TV
ENTER SLOW