Related Manuals for Black & Decker BDEMS600
Summary of Contents for Black & Decker BDEMS600
- Page 1 INSTRUCTION MANUAL MOUSE SANDER BDEMS600 Thank you for choosing BLACK+DECKER! Please read before returning this product for any reason.
- Page 2 English Definitions: Safety Alert Symbols and Words This instruction manual uses the following safety alert symbols and words to alert you to hazardous situations and your risk of personal injury or property damage. DANGER: Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. WARNING: Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.
-
Page 3: General Power Tool Safety Warnings
English GENERAL POWER TOOL SAFETY WARNINGS b ) Use personal protective equipment. Always wear eye protection. Protective equipment such as dust WARNING! Read all safety warnings and all mask, non-skid safety shoes, hard hat, or hearing instructions. Failure to follow the warnings and protection used for appropriate conditions will reduce instructions may result in electric shock, fire and/or personal injuries. -
Page 4: Cleaning And Disposal
English CLEANING AND DISPOSAL into account the working conditions and the work to be performed. Use of the power tool for • All surfaces in the work area should be vacuumed operations different from those intended could result and thoroughly cleaned daily for the duration of the in a hazardous situation. -
Page 5: Intended Use
English Motor CAUTION: When not in use, place tool on its side on a stable surface where it will not cause a Be sure your power supply agrees with the nameplate tripping or falling hazard. Some tools with large marking. Voltage decrease of more than 10% will cause loss battery packs will stand upright on the battery pack of power and overheating. - Page 6 English (Fig. C, C1) Finger Attachment (Fig. E) Switch To turn the tool ON, hold it as shown in Figure C or C1 and The finger attachment is used for fine detail sanding. push the on/off switch toward the front of the tool. To 1.
-
Page 7: Register Online
English Register Online 5. Reattach the top and bottom and firmly push the canister back onto the sander. Thank you for your purchase. Register your product now for: Hints for optimum use (Fig. G) • WARRAnTY sERViCE: Registering your product will help you obtain more efficient warranty service in case •... -
Page 8: Troubleshooting Guide
English Troubleshooting Guide BE sURE TO FOllOW sAFETY RUlEs AnD insTRUCTiOns PROBLEM POSSIBLE CAUSE POSSIBLE SOLUTION Unit will not start. Cord not plugged in. Plug tool into a working outlet. Circuit fuse is blown. Replace circuit fuse. (If the product repeatedly causes the circuit fuse to blow, discontinue use immediately and have it serviced at a BLACK+DECKER service center or authorized...