Cleaning Tools - Hoover Evo VE18LIG User Manual

CHARGING/DISCHARGING
1. Discharging
Check the remain capacity status by pressing the charging
status button on the battery pack.
LED Indication signal
○○○● <15%, flashing
○○●● 15%~25%
○●●● 26%~50%
●●●● 51%~75%
●●●● 76%~100%
IMPORTANT: Always ensure battery has sufficient battery
charge before use.
Charge your cleaner immediately if one LED light is flashing
(remaining capacity<15%).
2.Charging
To charge the battery you can connect the charger plug to the
battery pack directly when it is in the appliance or you can
remove the battery pack from the appliance by pressing the
battery release button, this allow you to charge the battery
pack only. It will take around 5.5 Hrs from full discharge to fully
recharge the battery.
During the charging process you will see the charge level
indicated by the LED on the battery pack. If the battery charge
level is below 25% you will see the first LED blink until it
reaches above 25% , then it will stay illuminated .This process
will continue on all four point of the LED indicating level of
battery charge 25%, 50% , 75% ETC. When the battery charge
has reached 100% all 4 points will be illuminated.
BATTERY LEVEL INDICATOR :
○○○● <15%, flashing
○○●● 15%~25%
○●●● 26%~50%
●●●● 51%~75%
●●●● 76%~100%
The LED light will keep flashing during the charging process
and will turn off 5 minutes after the battery has been fully
charged.
IMPORTANT: The appliance on/off switch must always be in
the OFF position during charging.
Use only the charger supplied with your cleaner to recharge.
It is normal for the charger to become warm to the touch
when charging.
NOTE: To optimise your battery performance you should fully charge your battery
on a regular basis or at least once per year.
WARNING: Do not try to open the battery pack and repair it by yourself.
Dispose of the batteries safely. Used batteries should be taken to a recycling
station and not disposed of with household waste.
* Certain models only
3.Battery Pack Use
a. Insert the battery pack by pushing it into the cleaner slot ensuring it is fixed in
position, you will hear a click when fully located.
When the product is turned on the LED light will illuminate automatically.
b. Push the battery release button to release the battery pack.
c. Pull the battery pack slowly from the slot.
d. Remove the battery pack to recharge or replace with the new battery pack.

CLEANING TOOLS

All accessories can be fitted directly onto the hose, handle and handle tube. Combine
accessories depending on use.
Connecting accessories to Hose
Plug in the long stretch hose to
1
the hose extension socket.
Connecting accessories to Handle Tube
Remove handle tube.
1
IMPORTANT! When using cleaning tools, the cleaner must
be kept in the upright position, particularly when cleaning
stairs. Hold unit while using hose or handle tube.
- 5 -
Choose your accessory and
2
connect it to hose.
Connect the hose to handle tube.
2
Choose your accessory and connect it
to the handle tube.
GB