Panasonic KX-TA1232 User Manual page 73

PT
(Account)
Press Account
(flexible button).
The corresponding
indicator light turns on.
You can keep talking.
User Manual
Downloaded from www.Manualslib.com
Entering account codes during or after a conversation
During a conversation or within 15 seconds after the other party hangs up;
account code
Enter an account code
(10 digits max., 0...9).
You may dial
99 instead
of "#".
Conditions
• In Verified - All Calls mode, you must always enter a pre-assigned account code when
making any of the following calls unless it has previously been stored in memory.
a)
Call Forwarding — to Outside Line
b)
Manual Dialing (Selecting an outside line)
c)
One-Touch Dialing
d)
Personal Speed Dialing
e)
Pickup Dialing (Hot Line)
f)
Redial, Last Number
g)
Redial, Saved Number (PT only)
h)
System Speed Dialing
• In Option mode, it is possible to record a calling or called party's account code in the
SMDR, during a conversation or within fifteen seconds after the other party hangs up.
• There is no need for an account code entry when receiving incoming calls.
• To clear and re-enter the account code, press " ".
• An account code can be up to 10 numeric digits (0 through 9). FLASH, PAUSE, etc. are not
allowed. After entering an account code, the delimiter "#" or "99" must be entered.
• Memory Dialing
An account code can be stored into Memory Dialing ("One-Touch Dialing", "System /
Personal Speed Dialing" ). The sequence to enter an account code into Memory Dialing is:
— [Feature Number] [Account Code] [#] [Line Access Code] [Phone Number]
— [Feature Number] [Account Code] [99] [Line Access Code] [Phone Number]
manuals search engine
Dial #.
or
Station Features and Operation (PT/SLT)
73