Remote Control Buttons - Philips SV2000 Owner's Manual

SVZ142.comb 4/7/99 6:30 PM

18 Remote Control Buttons

To select, press 0, then press the channel number you want. For
To select, press the +100 button, then press the last two digits of
the channel you want. For example, to select channel 117, press
Press to select the recording speed (SP, LP, or SLP). Details are on
Press to perform a Quick Find. Details are on page 40.
Press during tape playback to view a tape in slow motion. Slow
speed can be adjusted by pressing the F.FWD button (faster) or
the REWIND button (slower). Details are on page 35.
Press repeatedly to access menus or to remove menus.
Press repeatedly to view the on-screen status displays. Details are
When tape playback is stopped, press to rewind the tape at high
speed. During tape playback, press to rewind the tape while the
Press to cancel a timer recording. Details are on page 29. Press to
go back one step when setting the clock or a timer recording.
Press to add or delete channel numbers. Details are on page 13.
Press to start a recording. Details are on page 24.
Press to play a tape. Also, press to release Slow, Search, or Still
mode and to return to normal playback. Details are on page 35.
Use to enter digits and information when programming a function
in the on-screen menu (setting the clock, for example). Press to
Page 18
Press to turn the VCR on or off.
Number Buttons
Use to select channels.
example, to select channel 7, press 0, 7.
Channels 100 and above
the +100 button, 1, 7.
QUICK-FIND Button
DISPLAY Button
REWIND Button
picture stays on-screen. Details are on page 35.
RECORD Button
select an item in the on-screen menu.
POWER Button
Channels 1 - 9
POWER
SPEED Button
pages 24 and 44.
SPEED
SLOW
SLOW Button
MENU
REWIND
MENU Button
RECORD
on page 17.
PLAY Button
VCR/TV EJECT
1 2 3
4 5 6
7 8 9
CHANNEL
0 +100
SEARCH
QUICK-
TIME INDEX
FIND
DISPLAY EXIT COUNTER
RESET MEMORY
/ PLAY F.FWD
/ STOP
PAUSE/STILL