Automatic Channel Setup - Philips SV2000 Owner's Manual

SVZ142.comb 4/7/99 6:30 PM

12 Automatic Channel Setup

Although your VCR may automatically set up the channels you
receive when you turn it on for the first time, this function lets
you set up channels again. Make sure:
The VCR is on and is in VCR position. (The VCR/TV light will
appear on the display panel. If it does not, press the VCR/TV
button once.)
1
Press the MENU button repeatedly until the INITIALIZE
menu appears.
INITIALIZE
CHANNEL SET UP
SETTING CLOCK
LANGUAGE SELECT
2
Press the PLAY button or the STOP button repeatedly to
select CHANNEL SET UP. Then, press the F.FWD but-
ton.
CHANNEL SET UP
TV [ON]
CATV
ADD/DELETE CH
3
Press the PLAY button or the STOP button repeatedly to
point to TV (if you have an antenna) or CATV (if you
have a cable connection).
4
Press the F.FWD button once or twice. [ON] will appear
beside your selection, then the VCR will memorize all available
channels. When setup is complete, the lowest channel you receive
will appear on-screen.
Page 12
POWER VCR/TV EJECT
1 2 3
4 5 6
7 8 9
CHANNEL
0 +100
SPEED
SEARCH
QUICK-
SLOW TIME INDEX
FIND
1
MENU DISPLAY EXIT COUNTER
RESET MEMORY
REWIND / PLAY F.FWD
/ STOP
RECORD PAUSE/STILL
3
Helpful Hints
• Line Input mode will always be
stored in the VCR's memory as
channel 00. When you select chan-
nel 00 with the CHANNEL o/p
buttons or the Number buttons,
AUX will appear on-screen.
• You can not program channels if
you are using a Cable Box/DBS.
Details are on pages eight - nine.
2
4