Entertainment - LG 19LV2500 Owner's Manual

48

ENTERTAINMENT

ENTERTAINMENT
Connecting USB storage devices
Connect USB storage devices such as a USB flash
drive, external hard drive, or MP3 player to the TV
and use multimedia features (See "Browsing files"
on p. 49).
Connect a USB flash drive or USB memory
card reader to the TV as shown in the following
illustration.
or
To disconnect a USB storage device,
make sure to end the connection properly to
prevent damages to the TV or files.
1
Press Q.MENU to access the quick menus.
2
Press the Navigation buttons to scroll to USB
Device and press ENTER.
3 Disconnect the USB storage device only when
the message says that it is safe to remove.
CAUTION
y
Do not turn the TV off or remove a USB
storage device while the USB storage device
is connected to the TV, as this could result
in loss of files or damage to the USB storage
device.
y
Back up your files saved on a USB storage
device frequently, as you may lose or
damage the files and this may be not
covered by the warranty.
Tips for using USB storage devices
y
The TV recognizes only a USB storage
device.
y
If you connect a USB storage device to the
TV through a USB hub, your TV may not
recognize the USB storage device.
y
The TV may not recognize a USB storage
device that requires a special driver.
y
The recognition speed of a USB storage
device may differ depending on the device.
y
Only use a USB storage device which has
normal music or image files.
y
Use only USB storage devices that are
formatted as a FAT 32 or NTFS file system.
y
If you format a USB storage device as a
NTFS file system, you cannot delete the
saved files.
y
You may need to connect a USB storage
device to an external power supply with a
power adapter.
y
If the TV does not recognize a connected
USB storage device, replace the cable and
try again. Do not use an excessively long
cable.
y
The TV does not support some USB storage
devices properly.
y
You can use a multi-partition (up to 4) USB
storage device.
y
You can use up to 4 USB storage devices at
a time by using a USB multi-card reader.
y
The file alignment method of a USB storage
device is similar to the one of Window XP.
y
You cannot create or delete a folder saved in
a USB storage device directly on the TV.
y
The number of characters for a file name is
up to 100 English characters.
y
If there are too many folders and files in one
folder, it may not operate properly.
y
The recommended capacity for a USB
external hard disk is 1 TB or less and for a
USB storage device is 32 GB or less.
y
If a USB external hard disk with the Energy
Saving feature does not work, turn the USB
external hard disk off and on again to make
it work properly. For more information, refer
to the user manual of the USB external hard
disk.
y
USB storage devices below USB 2.0 are
supported as well. But they may not work
properly in the movie list.
y
This part of MAKING CONNECTIONS mainly
uses picture for PW350, LV3500 series.
Connecting to a HD receiver,
DVD, or VCR player
Connect a HD receiver, DVD, or VCR player to the
TV and select an appropriate input mode.
HDMI Connection
Transmits the digital video and audio signals from
an external device to the TV. Connect the external
device and the TV with the HDMI cable as shown
in the following illustration.
NOTE
y
Use a High Speed HDMI™ Cable
(v.1.3, HDMI™ CEC Support).
y
Use the latest High Speed HDMI™ Cable
with CEC (Customer Electronics Control)
function.
PW350 series
OPTICAL
DIGITAL
/DVI IN
AUDIO OUT
AV IN 1
VIDEO L/MONO O O AUDIO R R R
2
AUDIO IN
RGB IN (PC) (RGB/DVI)
1
REMOTE
CONTROL IN 2
ANTENNA
Y P P L R
B R
/CABLE
1
IN
RS-232C IN
VIDEO AUDIO
(CONTROL & SERVICE)
HDMI
LV3500 series
COMPONENT IN
OPTICAL
(RGB/DVI)
DIGITAL
AUDIO OUT AUDIO IN
AV IN 1
RGB IN(PC)
ANTENNA /
CABLE IN
RS-232C IN(CONTROL & SERVICE)
/ DVI IN
2 1 2 1
OPTICAL DIGITAL PTICAL DIGIT TICAL DIGIT ANTENNA ANTENNA ANTENNA/
LAN
AUDIO OUT CABLE IN
HDMI
73
MAKING CONNECTIONS
DVI to HDMI Connection
Transmits the digital video signal from an external
device to the TV. Connect the external device and
the TV with the DVI-HDMI cable as shown in the
following illustration. To transmit an audio signal,
connect an optional audio cable.
PW350 series
OPTICAL
DIGITAL
/DVI IN
AUDIO OUT
AV IN 1
VIDEO
L/MONO O O AUDIO R R R
2
AUDIO IN AUDIO IN
RGB IN (PC) (RGB/DVI) (RGB/DVI)
1
REMOTE
CONTROL IN 2
ANTENNA
Y P P L R
B R
/CABLE
1
IN
RS-232C IN
VIDEO AUDIO
(CONTROL & SERVICE)
AUDIO OUT
DVI OUT
LV3500 series
COMPONENT IN
OPTICAL
DIGITAL (RGB/DVI) (RGB/DVI)
AUDIO IN AUDIO IN
AUDIO OUT
AV IN 1
RGB IN(PC)
ANTENNA /
CABLE IN
RS-232C IN(CONTROL & SERVICE)
/ DVI IN
2 1 2
1
OPTICAL DIGITAL PTICAL DIGIT TICAL DIGIT
LAN
AUDIO OUT
AUDIO OUT
DVI OUT