When Using 3D Glasses - LG 19LV2500 Owner's Manual

76
MAKING CONNECTIONS
Connecting to a USB
Connect a USB storage device such as s USB
flash memory, external hard drive, MP3 player or a
USB memory card reader to the TV and access the
My media menu to use various multimedia files.
See "Connecting USB storage devices" on p.48 and
see "Browsing files" on p.76.
or
Connecting to a Headphone
( )
LCD
Listen to the sound through a headphone.
NT IN
ANTENNA /
CABLE IN
1
NOTE
y
AUDIO menu options are disabled when
connecting a headphone.
y
When changing AV MODE with a headphone
connected, the change is applied to video
but not to audio.
y
Optical Digital Audio Out is not available
when connecting a headphone.
y Headphone impedance: 16 :
y
Max audio output: 10 mW to 15 mW
y
Headphone jack size: 0.32 cm (1/8 inch)
SIMPLINK Connection
Use the TV remote control to play and control the
AV device connected with the HDMI cable through
HDMI-CEC. Your TV only works with the devices
that support HDMI-CEC.
Connect one end of the HDMI cable to the HDMI/
DVI IN or HDMI IN terminal on the rear of the TV
and the other end to the SIMPLINK device.
NOTE
y
If the connected device does not support
HDMI-CEC, the SIMPLINK feature is
unavailable.
y
To operate SIMPLINK, you should use
an High Speed HDMI cable with the CEC
(Consumer Electronics Control) function.
Activating and Using the
SIMPLINK menus
1
Press SIMPINK to access the SIMPLINK
menus.
2
Press the Navigation buttons to scroll to On.
3 Press the Navigation buttons to scroll to one of
the devices and press ENTER.
1
2
3
4
5
NOTE
y
To watch the TV in 3D, you must put on your
3D glasses. For best results, you should
wear LG Brand 3D glasses. The 3D imaging
may not display properly when using another
brand of 3D glasses. Please see the 3D
glasses manual for instructions on how to
use the 3D glasses.
y
After powering on the TV, a few seconds
may be needed for your TV to calibrate.
y
It may take a moment for you to see the
3D imaging if you look away from the TV
and then revert your eyes back to the 3D
program.
y
The TV may flicker slightly if the 3D imaging
is displayed under 3 wavelength fluorescent
light (50 Hz - 60 Hz) or magnetic fluorescent
lamp (50Hz - 60 Hz). In such instances, it is
recommended to turn the lights off.
y
If there is an obstacle between the TV and
the 3D glasses, the 3D imaging may not
display properly.
y
Do not use the TV in close proximity to other
electronic and RF equipments.
y
In Analog TV, 3D Imaging does not work.
y
When watching 2D images, it is
recommended to take off the 3D glasses. If
you watch 2D images with the 3D glasses
on, you may see distorted images.
45
3D IMAGING

When using 3D Glasses

CAUTION
y
3D glasses are sold separately. Refer to the
3D glasses manual for operating instructions.
y
Do not use the 3D glasses to replace your
corrective glasses, sunglasses or protective
goggles.
y
Do not store the 3D glasses in hot or cold
locations.
y
Do not drop objects onto the 3D glasses. Do
not drop or bend the glasses.
y
Since the lenses of the 3D glasses are
easily scratched, make sure to clean only
with a soft cloth. Shake off any dust before
using the cloth since the glasses are easily
scratched.
3D Imaging Viewing Range
TV size, viewing angle & other circumstances
may change the viewing distance and the angle of
view.
Viewing Distance Viewing Angle
2 m - 10 m 120 ° (When the viewing
(6.5 ft - 32.8 ft) distance is 2 m (6.5 ft))
TV
60 ° 60 °
2 m 2 m
10 m