Toshiba MMU-AP0072H2UL-1 Service Manual page 134

No. Part name
Evaporator
(Heat exchanger)
Procedures
1) Follow to the procedure in the item ‚ .
2) Remove the pipe holder from the rear
side of the main unit.
3) Remove 2 fixing screws at the left side
of the end plate of the heat exchanger.
4) Remove 2 fixing screws on the heat
exchager fixing holder to separate the
heat exchager from the back body.
<AP0243 to AP0153>
5) Remove 4 fixing screws on the heat
exchager fixing holder to separate the
heat exchager from the back body.
<AP0123 to AP0073>
2 screws
134
Remarks
<AP0243 to AP0153>
Screw Screw Screw
Screw Screw Screw
<AP0123 to AP0073>
Screws
Screw Screw Screw