Programming A Recording With Teletext - Philips 14PV330/07 Operating Instructions Manual

f
Press the button.
OK
g
Confirm the message on the screen with the
A TIMER recording can only start, if the set is not used for
other video recorder functions (e.g. playback).
h
Exit the menu with the
E The programming information has been stored in a TIMER
block.
i
Make sure that the cassette you have put in can be
recorded on.

Programming a recording with TELETEXT

With this function programming a recording will be
considerably easier. In TELETEXT you select the TV
programme you want record. All the required information for
recording will be transferred and stored in a TIMER block. You
can find more information on TELETEXT in the chapter 'TV SET
FUNCTIONS'.
a
Select the TV channel you want to record from.
b
Press to activate TELETEXT. Your TV-VIDEO
TELETEXT e
Combi will now show TELETEXT for the TV channel you
have selected.
c
With the number buttons
programme guide page. This page can be stored as the
preferred page (see paragraph 'How to read TELETEXT').
d
Press TIMER s . '
PLEASE WAIT
the bottom of the screen.
Next, a highlighted title line will appear.
D If '
NO TIMER INFORMATION ON THIS
' appears, TELETEXT programming cannot be
PAGE
used for the programme you have selected. In this
case, you should programme the recording as
described in the paragraph 'programming a
recording'.
e
Use the BP r and AP q
( h ) to the TV programme you want to record.
D If you want to cancel this function, press
.
TELETEXT e
button.
OK
button.
TIMER s
select the TELETEXT
0-9
' will briefly appear at
buttons to move the cursor
f
Press . The timer menu will appear. The required
OK
programming information has been stored in a TIMER
block. Please check the information.
TIMER PROGRAMMING
DATE PROG. START END
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
15 xxx 15:36 15:50 -
ã è
«
g
For changing the TIMER information, select the entry field
with the or
DSr SqC
information with the
BP r
the number buttons
0-9
D Under '
', use the
REP.
select daily or weekly programming.
' ': Recording only once.
ONCE
' ': Recording from Monday to Friday.
Mo-Fr
' ': Recording from Monday to Sunday.
Mo-Su
' ': Recording every week on the same day.
WEEKL
D Under '
VPS/PDC
the or
BP r AP q
D Under '
' select the recording speed 'SP' or 'LP'
LP
with the BP r or
h
When all information is correct, press
i
Confirm the message on the screen with
A Timer recording can only start, if the set is not being
used for other video recorder functions (e.g. playback).
D The programming information has been stored in a
TIMER block.
j
Exit the menu with the
k
Make sure that the cassette you have put in can be
recorded on.
VPS
LP PDC REP.
* ONCE
Store:
press OK
button. Change the
or button or with
AP q
.
BP r or AP q button to
' switch 'VPS/PDC' on or off with
button.
AP q button.
.
OK
.
OK
button.
TIMER s
21