Acura RDX Navigation Manual page 319

Problem
The voice control system is having difficulty
recognizing my voice commands.
I cannot give voice commands.
I cannot select an option using the Interface
Dial.
The navigation system pronunciation of
street names in the guidance command or
destination address sounds strange.
The screen is bright when I drive at night.
The screen is dark when I drive during the
day.
How do I change or remove my PIN?
I have forgotten my PIN. How do I reset the
PIN for Home or the PIN for personal
addresses?
Check that the vents are not blowing air onto the microphone on the ceiling, the
vehicle is as quiet as possible, and you are using the correct command when
speaking.
2 Voice Recognition P. 23
Make sure you selected OK at the Startup Confirmation screen.
2 Start-up P. 20
To reduce potential driver distraction, certain onscreen functions and features are
limited or inoperable while the vehicle is moving. Use voice commands or pull over
to proceed.
The basic guidance phrases use a studio-recorded voice, but street names are
pronounced using a machine-generated voice. Consequently, the name may be
mispronounced or sound strange at times.
1. Check that the nighttime dashboard brightness control is not set to maximum.
2. Press the SETTINGS button. Select Navi Settings > Map > Color (Night).
2 Color P. 73
Press the SETTINGS button. Select Navi Settings > Map > Color (Day).
2 Color P. 73
1. Press the SETTINGS button. Select Navi Settings > Personal Info > PIN
Number > Address Book PIN or Go Home PIN.
2. Enter your existing PIN. You then have the choice to change or remove the PIN.
2 PIN Numbers P. 47
A dealer must reset the PIN for you.
uuTroubleshootinguMap, Voice, Entering Destinations
Solution
317