Voice Control System; Command Input - Acura RDX Navigation Manual

Voice Control System

Your vehicle has a voice control system that allows hands-free operation of most of
the navigation system functions.
The voice control system uses the
the steering wheel and a microphone near the map lights on the ceiling.
A "Getting Started" feature provides a tutorial that explains how to use the voice
control system.
2 Getting Started Tutorial P. 15

Command Input

If the system does not understand a command or you wait too long to give a
command, the system asks you to repeat the command.
When you give a command, the system generally either repeats the command as a
confirmation or asks you for further information. If you do not wish to hear this
feedback, you can turn it off. However, listening to the feedback will help familiarize
you with the way the system expects commands to be phrased.
If the system cannot perform a command or the command is not appropriate for the
screen you are on, the system beeps.
On character input screens, a list of possible characters is displayed if the system
does not recognize your command.
You can find out which voice commands are available for a particular screen using
the "Voice Help" command. The system will display and read the list of available
commands to you.
2 Voice Help P. 15
22
(Talk) and (Hang-Up/Back) buttons on
1

Voice Control System

When you press the (Talk) button, the system
prompts you to say a voice command and gives
examples. Press and release the
again to bypass this prompt and give a command.
1 Command Input
The audio system is muted while using the voice
control system.
(Talk) button