Removing The Wheel Covers - Pontiac 2003 Montana Owner's Manual

Removing the Wheel Covers

If the wheel has a center cap, use the handle of the
folding wrench to pry it off. Then, with the other end of
the folding wrench, loosen the nuts.
If your vehicle has the plastic "bolt-on" wheel covers,
loosen the bolts completely using the folding wrench,
and remove the wheel cover.
5-74
Removing the Flat Tire and Installing
the Spare Tire
For wheels with a wheel lock key, use the wheel
lock key between the lock nut and folding wrench.
The key is supplied in the front passenger door
pocket.
Notice: To help avoid damage to lock nut or wheel
lock key, do not use an impact wrench with this key.
1. Loosen the wheel nuts
– but do not remove
them – using the
folding wrench. (Turn
the handle about
180 degrees, then flip
the handle back to
the starting position.
This avoids taking
the wrench off the lug
nut for each turn.)