Hookups With A Stereo Tv - Philips VRZ220AT Owner's Manual

VRZ220/250 layout 4/8/99 10:11 PM

10 Hookups With a Stereo TV

VRZ250
VRZ220
1
Connect the antenna or cable to the ANT(enna) IN Jack on the back of the
VCR.
2
Connect a video cable (not supplied) to the yellow VIDEO OUT Jack on the
back of the VCR. Then, connect the other end of the video cable to the
VIDEO IN Jack on your TV.
3
VRZ250
Connect an audio cable (not supplied) to the red and white AUDIO OUT
Jacks on the back of the VCR. Then, connect the other end of the audio
cable to the AUDIO IN Jacks on your TV.
3
VRZ220
Connect an audio cable (not supplied) to the white AUDIO OUT Jack on
the back of the VCR. Then, connect the other end of the audio cable to the
AUDIO IN Jack on your TV.
If your TV has Right and Left AUDIO IN Jacks, you must use a "Y" splitter audio cable
as illustrated to deliver audio to the TV's right and left channels. This hookup will not
give you stereo sound. To get stereo sound, use the connections on pages six-seven
and select the channel to be viewed at the TV (with the VCR turned off).
4
Turn on your TV, making sure it is in Line Input mode. Please refer to your TV
owner's manual for details.
Page 10
antenna or cable
ANT
AUDIO
IN
L
IN
OUT
R
OUT
VIDEO
CH3 CH4
OUT IN
Video Cable
Audio Cable
antenna or cable
ANT
IN
AUDIO
IN
OUT OUT
CH3 CH4
VIDEO
Video Cable
Audio Cable