Quick Install - Fishman RARE EARTH MIC BLEND User Manual

Quick Install

To temporarily install the pickup, loosen the clamps with a Phillips screwdriver.
Position the pickup in the soundhole, parallel to and as close to the end of the
fingerboard as possible. Gently re-tighten the clamps. For now, run the cable out
through the soundhole.
Precaution: To prevent possible damage to the guitar finish, avoid leaving the
cable in contact with your instrument for prolonged periods of time.
If you travel with your guitar or store it for long periods with the pickup in place,
we strongly recommend that you have the endpin jack permanently installed in
the guitar. Installation instructions for professional installers are available from
Fishman Support at www.fishman.com/support.
3