Bridge With Rfc 1483 Configuration - D-Link DSL-500 User Manual

DSL-500 ADSL Router User's Guide

Bridge with RFC 1483 Configuration

Menu options for the DSL-500 are different when the connection profile specifies Bridge with RFC 1483 since it
is acting in the capacity of a bridge rather than a router. You can see from the figure below that there are fewer
menu options for device configuration. Most of the menus in the Configuration file are the same and are used in
the same way they are used for Router with PPP configuration. Instructions for using the Connection Profile and
Ethernet IP Address menus can be found in the previous section, Router with PPP Configuration.
The Layer 2 Filtering menu only appears
when the device is in bridge mode.
Bridge Configuration Menus
56