Static Route Configuration - D-Link DSL-500 User Manual

DSL-500 ADSL Router User's Guide

Static Route Configuration

Use Static Routing to specify a route used for data traffic within your LAN. This can be used to specify that all
packets destined for a particular subnet use a predetermined gateway.
Up to 18 static route configurations can be entered into the table. To eliminate an existing static route
configuration, click the Delete button for that configuration.
The information listed for the static route configuration is as follows:
IP Address IP address of the subnet or device where packets are routed.
Subnet Mask Subnet mask that allows packets to be routed as intended.
Gateway IP address of the gateway used for this static route.
Interface LAN interface
Metric Maximum number of hops allowed for the static route.
State Route is enabled or disabled.
Name Name of the subnet or static route used.
To modify and existing route configuration click on the number for that route to see the configuration menu. To
define a new route, click on an unused static route configuration number to see the configuration menu.
50
Static Route Configuration Table