Work Area; Electrical Safety; Personal Safety - Makita 6410 Instruction Manual

GENERAL SAFETY RUL
(For All Tools)
WARNING! Read and understand all instruct
to follow all instructions listed below, may resu
shock, fire and/or serious personal injury.
SAVE THESE INSTRUCT
READ ALL INSTRUCTIONS.
WORK AREA
1. Keep your work area clean and well lit. Cluttered benches and
accidents.
2. Do
not operate power tools in explosive atmospheres, such as
. .
of flammable liquids, gases, or dust. Power tools create sp
ignite the dust or fumes.
3.
Keep bystanders, children, and visitors away while operatin
Distractions can cause you t o loose control.
ELECTRICAL SAFETY
4. Double Insulated tools are equipped with a polarized plug lon
than the other.) This plug will fit in a polarized outlet only
plug does n o t fit fully in
the outlet, reverse the plug.
If
it s
contact a qualified electrician t o install a polarized outlet.
the plug in any way. Double insulation
E l
eliminates the ne
wire grounded power cord and grounded power supply sys
5. Avoid body contact w i t h grounded surfaces such as pipes, ra
and refrigerators. There is an increased risk of electric shock
grounded.
6. Don't expose power tools t o rain or wet conditions. Water e
tool will increase the risk of electric shock.
7.
Do
not abuse the cord. Never
use
the cord t o carry the tools
from an outlet. Keep cord away from heat, oil. sharp edges o
Replace damaged cords immediately. Damaged cords incre
electric shock.
8. When operating a power tool outside, use an outdoor extensi
"W-A" or "W." These cords are rated for outdoor use and
of electric shock.
PERSONAL SAFETY
9.
Stay alert, watch what you are doing and use common sense
a power tool. Do not use tool while tired or under the influ
alcohol, or medication. A moment
of
inattention while opera
may result
in
serious personal injury.
IO.
Dress properly.
Do
not wear
loose
clothing or jewelry. Contain
your hair, clothing, and gloves away from moving parts. Loose
or long hair can be caught in moving parts.
2