10 mm (3/8 inch)
variable speed/reversing (12 pages)
Summary of Contents for Makita 6411
Page 1
INSTRUCTION MANUAL Drill 6411 6412 6413 007894 DOUBLE INSULATION WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
EC Declaration of Conformity be collected separately and returned to Makita Corporation responsible environmentally compatible manufacturer declare that the following Makita recycling facility. machine(s): ENE032-1 Intended use Designation of Machine: Drill The tool is intended for drilling in wood, metal and plastic.
000230 Tomoyasu Kato If operating a power tool in a damp location is Director unavoidable, use a residual current device Makita Corporation (RCD) protected supply. Use of an RCD reduces 3-11-8, Sumiyoshi-cho, the risk of electric shock. Anjo, Aichi, JAPAN 10.
"OFF" position when released. Drilling in metal For 6411 To prevent the bit from slipping when starting a hole, To start the tool, simply pull the switch trigger. Release make an indentation with a center-punch and hammer at the switch trigger to stop.
Only use accessory or attachment for its stated purpose. If you need any assistance for more details regarding these accessories, ask your local Makita Service Center. Drill bits •...
Page 8
Makita Corporation Anjo, Aichi, Japan 884702C220...