Table of Contents
Advertisement
CCZ092comb.QX33
4/5/99 6:06 PM
Read and follow the steps below to record a TV program.
1
Place a tape with its record tab intact (see page five) in the
TV/VCR. The power will come on. Or, if the tape is already in the
TV/VCR, press the POWER button to turn on the TV/VCR.
2
Press the SPEED button until the desired tape speed
appears on the TV/VCR screen. Details about tape speed are
given below.
3
Use the CHANNEL
to select the channel to be recorded. (Channels cannot be
changed during recording.)
4
Press the REC(ord)/OTR button once to start recording.
The REC(ord) light will glow.
If there is not a tape in the TV/VCR, NO CASSETTE flashes on-
screen briefly.
If the tape does not have a record tab, PROTECTED CAS-
SETTE CANNOT RECORD flashes on-screen briefly. The
TV/VCR will eject the tape. Insert another tape.
5
To pause the recording (for example, during commer-
cials), press the PAUSE/STILL button. The REC(ord) light
will flash. To resume recording, press the PAUSE/STILL
button again or the REC(ord)/OTR button. The REC(ord)
light will glow.
6
To stop recording, press the STOP/
Tape Speeds
This chart shows the recording/playback time for three types of
video cassettes (T160, T120, and T60). There are three playback
speeds: SP, LP, and SLP. During playback, the TV/VCR selects
the tape speed automatically. When recording, you can change
the tape speed using the SPEED button (see page 22).
Tape Speed
Type
SP
(Standard Play)
LP
(Long Play)
SLP
(Super Long Play)
Page 29
/
buttons or the Number buttons
button.
Maximum Record/Playback Time
T160
T120
T60
2 hrs.
2 hrs.
1 hr.
40 mins.
5 hrs.
4 hrs.
2 hrs.
20 mins.
8 hrs.
6 hrs.
3 hrs.
Recording 29
1
2
3
1
5
6
4
o
8
9
7
p
0
+100
o
2
p
o
PLAY
6
REW
F.FWD
STOP
p
o
p
4
Helpful Hints
• You cannot record one channel
while watching another.
• Recording options are on pages 30
- 36.
• You cannot record if RECORD
DEFEAT is set to ON. (REC
DEFEATED will flash on-screen.)
Details are on page 36.
• If you pause a recording for more
than five minutes, the TV/VCR will
switch to Stop mode automatically
to protect the video cassette tape
from damage.
• You can change the tape speed
with the SPEED button while a
recording is in progress, but some
distortion may appear on the tape.
3
5
Advertisement
Table of Contents
