Automatic Operation Features 45 - Philips/Magnavox CCX252AT Owner's Manual

Tv/vcr 25 in 2 hd
Table of Contents

Advertisement

The following playback features will always operate:
Automatic Playback
When you put a tape in the TV/VCR, the power will come on
automatically. If the tape's record tab is missing, playback will
begin. (If a timer recording is set, you may have to press the
POWER button to turn on the TV/VCR. If the TV/VCR is turned
off and a timer recording is set, the TV/VCR will not accept a tape
that is missing a record tab.)
Automatic Rewind, Eject, Off
When a tape is played, fast forwarded, or recorded to its end, the
TV/VCR will rewind the tape, stop, turn itself off, then eject the
tape. If a real time counter memory is set, the TV/VCR will only
rewind the tape to the point at which the real time counter was
set to zero, then stop. The TV/VCR will not turn itself off or
eject the tape.
Memory Rewind, Power Off
When the POWER button is pressed while the TV/VCR is rewind-
ing a tape, REW
POWER OFF will appear on-screen. The
TV/VCR will turn itself off when the tape has finished rewinding.
If a real time counter memory is set, the TV/VCR may only
rewind the tape to the point at which the real time counter was
set to zero, then turn itself off.
Tape Eject
A tape can be ejected with the TV/VCR power on or off (but the
TV/VCR must be plugged in). If a timer recording is programmed,
a tape can not be ejected when the power is off. Turn on the
TV/VCR power, then eject the tape. Be sure to insert a tape and
turn off the TV/VCR power for the timer recording.
Automatic Tracking Adjustment
The TV/VCR has automatic tracking, which continually adjusts
tracking to give you the best possible picture quality. With some
recordings, however, you may get a better picture using the man-
ual tracking controls (see below).
Manual Tracking
To adjust the tracking manually during tape playback, press the
CHANNEL Up/Down buttons on the TV/VCR or the TRACKING
Up/Down buttons on the remote control.
NOTES:
• To return tracking to the position it was in when the TV/VCR was
shipped from the factory, press the CHANNEL Up/Down buttons on
the TV/VCR at the same time.
• Tracking is returned to automatic tracking when a tape is inserted,
or when the STOP/
Before
Tracking
Adjustment
button is pressed to halt playback.

Automatic Operation Features 45

After
Tracking
Adjustment

Advertisement

Table of Contents
loading

Table of Contents