Channel Memory - Philips/Magnavox CCX252AT Owner's Manual

10 Channel Memory

Although the TV/VCR may automatically memorize the channels
you receive when you turn it on for the first time, you may pro-
gram channels again. Follow the steps below to program channels.
1
Press the MENU button to display the pop up menu.
TO ADJUST PRESS +/-
CABLE
INPUT
B
EXIT
PRIM. SETUP
VCR PROGRAM
VCR SETUP
CAPTION
2
Press the PLAY/ button or the STOP/
INPUT. Press the REW(ind)/– button or the F.FWD/+
button until ANTENNA or CABLE (whichever you have)
appears to the right of the pop up menu.
3
Press the STOP/ button repeatedly to select PRIM.
SETUP, then press the F.FWD/+ button.
PRIMARY SETUP
1 SELECT LANGUAGE
2 AUTO PROGRAMMING
3 ADD/DELETE CHANNEL
4 CH. MEMORY REVIEW
5 VOLUME BAR [ON]
6 SET CLOCK
TO SELECT PRESS NUMBER
TO END PRESS EXIT
4
Press the Number 2 button to select AUTO PROGRAM-
MING. AUTO PROGRAMMING MEMORIZED CH. ... will
appear on-screen. The TV/VCR will place all of the channels you
can receive into its memory.
5
Wait for a few minutes. When programming is complete,
CHANNELS ARE SET will appear on-screen. Then the program-
ming of the lowest channel number placed in the TV/VCR's mem-
ory will appear on-screen. Now, when you press the CHANNEL
Up/Down buttons, you will scan only through channels you
receive.
5
button to select
2
1
• Line Input mode will always be
• When you select channel 00, A/V IN
• You cannot program channels when
Wait for the TV/VCR to pro-
gram channels.
2 3
1
5 6
4 o
8 9
7
p
0
+100
o
p
o
PLAY
–
REW F.FWD
STOP
p
o
p
Helpful Hints
stored in the TV/VCR's memory as
channel 00. You cannot delete it.
will appear on-screen briefly. To exit
Line Input mode, use the Number
buttons or the CHANNEL Up/Down
buttons to select another channel.
the TV/VCR is on channel 00 (A/V
INPUT will be selected at INPUT at
step 2). Select ANTENNA or CABLE
at step 2.
4
3
+