HP 5120 SI Series Security Configuration Manual page 30

To do...
Set the minimum
password length
Configure the
password
composition
policy
Specify the service types for the local
user
Configure the binding attributes for the
local user
Configure the authorization attributes
for the local user
Set the expiration time of the local user
Assign the local user to a user group
Use the command...
password-control length length
password-control composition
type-number type-number
[ type-length type-length ]
In non-FIPS mode:
service-type { ftp | lan-access |
{ ssh | telnet | terminal } * |
portal | web }
In FIPS mode:
service-type { lan-access | { ssh
| terminal } * | portal | web }
bind-attribute { ip ip-address |
location port slot-number
subslot-number port-number |
mac mac-address | vlan vlan-id }
*
authorization-attribute { acl
acl-number | idle-cut minute |
level level | user-profile
profile-name | user-role
security-audit | vlan vlan-id |
work-directory directory-name }
*
expiration-date time
group group-name
18
Remarks
Optional
By default, the setting for the user
group is used. If there is no such
setting for the user group, the
global setting is used.
Optional
By default, the setting for the user
group is used. If there is no such
setting for the user group, the
global setting is used.
Required
By default, no service is
authorized to a local user.
Optional
By default, no binding attribute is
configured for a local user.
Optional
By default, no authorization
attribute is configured for a local
user.
For LAN and portal users, only
acl, idle-cut, user-profile, and
vlan are supported.
For SSH and terminal users, only
level is supported.
For FTP users, only level and
work-directory are supported.
For Telnet users, only level and
user-role is supported.
For other types of local users, no
binding attribute is supported.
Optional
Not set by default.
Optional
By default, a local user belongs to
the default user group system.