HP t5630w Manual page 4

making and saving cHanges (continued)
tiPs
• if eWf is disabled, it will remain disabled until it is manually re-enabled.
• be sure to re-enable it when you no longer want to write permanent changes to the flash memory.
• reboot the system for the command to take effect.
• all changes (intentional or unintentional) since last boot-up of thin client will be written to disk
when one commits the write filter. therefore it is recommended that you first reboot the device.
• current default ram disk (Z:) size is set at 16 mb. if you
need to add applications and driver, you may need to
increase this temporary storage: click Start > Control Panel
> HP RAMDisk Manager.
configuring and making connections
Terminal services (RDP)
select remote desktop connection
icon on desktop.
4
use HP easy configuration utility (HP easy config) to quickly and easily
configure your thin client to operate in one of four user modes. for each
mode selected, HP easy config lets you configure three groups of settings:
a connection, an additional user and kiosk mode.
default desktop is the factory default when you start your thin client for the
first time. in this mode, the thin client boots in standard desktop mode
without making any preconfigured connections.
to configure a connection:
1. select the HP easy config icon on the desktop.
2. select the desired thin client mode and enter configuration information.
3. click Finish.
4. next time the thin client is started, it will boot into the selected mode.
to log out of the selected appliance mode, press ctrl + alt + the up arrow and a log-off button
appears in the bottom right corner. Press ctrl + alt + the down arrow to make the log off button
disappear. to return to the default desktop mode, log out of the selected mode. during the
automatic log-on screen, hold the shift key and the log-in screen appears. log in as administrator
and use HP easy config to return to the default desktop mode.
to configure connection, select options in
dialog box.
to improve your multimedia experience, HP
Wes thin clients include HP rdP
enhancements software. for more information
please visit www.hp.com/go/vce.