HP t5630w Manual page 2

get Your neW tHin client sYstem uP and running.
refer to the microsoft
guide at www.hp.com/support/manuals/thinclients. select your thin client and
its respective guide under General Reference.
logging on/off and creating accounts
the user account is the factory default log-in when you turn on your new HP Windows
embedded standard thin clients for the first time.
You can identify the type of user account by clicking start and reading the account
name located on the start menu.
To switch between User and Administrator account:
1. While holding the shift key down, click Start >
2. the Windows log-on screen will be displayed.
3. type your user name and password.
there are two pre-configured Wes accounts.
Default:
user account
administrator account
Administrator
full access to file system, control
panel applets, write filter
configuration and other
administrative tools
Enable and disable user
security utilities
When you want to temporarily disable
the locked down characteristics of the
local user account for troubleshooting
or setup purposes.
to access, go to: Start menu > Setting >
Control Panel > Administrative Tools.
this Quick start guide illustrates some of the most common administrative
tasks to get your HP microsoft Windows
2009 thin client up and running. However, if you have questions, need
more information or want to set up a more unique configuration, please
Shut Down > Log Off.
User
Part of the Power user group
restricted to subset of start menu
items, limited control Panel access
and no file system access, etc.
Windows embedded standard 2009 Quick reference
®
User name
user
administrator
embedded standard (Wes)
®
Password
user
administrator
Default User Template
this is the template used when a
new user (local or domain) logs
onto the device for the first time.
this template has policies
configured similarly to current
administrator account.
Enable restores the
predefined policies for
the User account.
Disable temporarily
removes predefined
policies for the User
account.