Optional Equipment - Avalon Olympic 1190 Owner's Manual

Attach each leg to the stove by
inserting a bolt and washer through the
hole or slot in the leg and into the
threaded hole on the stove.
These rubber-tipped bolts are for leveling the stove.
Make sure they contact the floor. Do not adjust
with weight on the legs, the rubber tips may tear.
The two pedestal bolts
attach the pedestal to
the bottom of the stove.
The dowels insert onto
the front and back edge
of the pedestal base.
Stove
Early models mount to the
pedestal through these holes.
The lag bolts and washers may be
inserted through these holes to
anchor the pedestal to the floor.
9/16" Socket Wrench
Pedestal
If using outside air, tuck
the insulation under the
sides of the pedestal.