Table of Contents
Advertisement
5.5
Extended installation
Press the MENU key.
Highlight the second menu item Search for
Channels using the arrow key
then press OK.
After the fi rst installation (refer to chapter
Install), it may be required to search for
channels again or to add specifi c channels that
are additionally broadcast.
Note
In order to carry out an extended installation,
you have to reset the device to its default
settings. Refer to chapter Restoring Factory
Settings.
Two options are available.
Automatic Search
This scan mode is usually the appropriate
one, because normally all channels are found
automatically.
Highlight Automatic Search and then
press OK.
Use more of your Digital Terrestrial Receiver
or
and
Press the OK key to start the automatic
scan mode.
Using
•
The channels found are to be added to the
old list (standard setting),
•
The old channel list is to be overwritten,
•
The new found channels are to be
discarded.
Press the OK key.
Manual Search
This type of scan mode enables the specifi c
search for an individual channel. This is
particularly interesting if you only want to
include one individual channel into your channel
list and you know the accurate information on
the channel and frequency.
Highlight Manual Search and then press
OK.
or , choose whether:
21
Advertisement
Table of Contents
