Teac LEV40A317FHD User Manual page 34

Audio Selection for SVCD or VCD
There are five audio selections available: Stereo (L/R), L/L, R/R, L/L Auto A/D Detect,
and R/R Auto A/D Detect. With each consecutive press of the button, the audio
selection cycles through these options. For example, if you press the button six times,
the audio selection cycles back to Stereo.
Audio Selection for CD, HD-CD, WMA, Digital Audio Discs
There are three selections available: Stereo (L/R), L/L, and R/R.
Audio Selection for DVD and SVCD
When playing a DVD or SVCD disc, press the AUDIO button to display the current
audio language. Press the button again to browse and select the next supported
audio language. NOTE: Certain DVDs have limited language selections, or none
at all. Subjective to manufacturer specifications.
Press the Power button on the TV or the remote control, then press the INPUT button
to select DVD mode. If there is no disc in the DVD player the screen will show "NO
DISC". Insert a disc with the label facing the correct direction according to the picture
next to the disc slot. Do not touch the disc's reflective surface. Hold the disc at the
edges with your fingers and gently place the disc into the slot. The player will
automatically draw the disc into the player. To eject the disc, press the EJECT
button on the TV or the EJECT "▲" button on the remote control.
DVD Setup Mode
● Setup Mode provides the menu for the configuration of General Setup Page,
Audio Setup Page, Dolby Digital, Setup, Preference Page.
● Item selection in the Setup Menu is done by using the Navigation Arrows, SETUP
button and the OK button.
● Press the SETUP button first, enter into SETUP menu, then press the DIRCTION
RIGHT button, you can enter into the next Sub-menu.
● Press the SETUP button again to exit the Setup Menu.
30