Manage Software Setup Menu - McIntosh MX160 Owner's Manual

MENU ITEM
Trigger out setup
Network setup
MENU ITEM
Manage software
Backup and restore
Factory Reset
Update Software
SYSTEM CONFIGURATION SETUP MENU, con't
SUB MENU SELECTION
●Power any
Output trigger 1
●Level
Output trigger 1
●Power any
Output trigger 2
●Level
Output trigger 2
●Automatic
Network configuration

MANAGE SOFTWARE SETUP MENU

SUB MENU SELECTION
A list of current Firmware Modules installed into the MX160 with their version numbers
Software information
Current Network Setting for the MX160
Network information
Backup (device used for
●Sd-card
storing the data)
Restore (device previously
●Sd-card
used for backing up the
data)
If it becomes necessary to return the MX160 Operational and Setup Settings to the factory default values and settings select "Start factory reset" now
Please contact your McIntosh Dealer about the MX160 Software Update
OPTION(S)
Off, Source, Source A, Source B,
Power A, Power B
Pulse
Off, Source, Source A, Source B,
Power A, Power B
Pulse
Manual
OPTION(S)
USB (Device inserted into USB Socket 1 or 2)
USB (Device inserted into USB Socket 1 or 2)
DESCRIPTION
The function which activates Output trigger 1, refer to the Setup
Source Edit Menu on page 19, Trigger setting
Determines the type of signal available at the Trigger Output Jack
The function which activates Output trigger 1, refer to the Setup
Source Edit Menu on page 19, Trigger setting
Determines the type of signal available at the Trigger Output Jack
Manually enter the IP Address, Net mask, Gateway and DNS server
DESCRIPTION
It is best to maintain a separate Sd-Card or USB Drive for
the sole purpose of backing up the current MX160 Operating
and Setup Settings. Enter a name and including the date for
reference purpose
Insert the device previously used for backing up the MX160
Data to restore it. Then select the type of device and backup
file name/date, followed by "Start restore"
Settings, con't
27