McIntosh MX160 Owner's Manual page 15

How to use the Remote Control
The supplied MX160 Remote Control (HR085) is
capable of directly controlling the functions of con-
temporary McIntosh Source Components connected to
the MX160 via the Data Ports.
Notes: 1. If at any time the MX160 seems unresponsive
to HR085 Remote Control Commands, press
the DEVICE Push-button to select
first.
2. For additional information on using the
HR085 Remote Control with the McIntosh
Model, please refer to the "How to Operate"
starting on page 30.
3. For additional information on assigning the
Data Ports, refer to "How to Setup" starting
on page 17.
Trim
Press the TRIM Push-button until the desired Trim
function (Balance, Trim Level, etc.) appears on the
MX160 Front Panel Display, then press the LEVEL
Up or Down Push-button to adjust the Trim setting.
Note: Press the TRIM Push-button to recall the last Trim
function selected. For additional information on
using the Trim Functions refer to "How to Oper-
ate" page 32.
How to use the HR085 Remote Control
15