On Bluetooth Communication - Sony HT-CT290 Operating Instructions Manual

Dimensions (w/h/d) (approx.)
900 mm × 52 mm × 86 mm
1 1
(35 / in × 2 / in × 3
2 8
Mass (approx.)
2.3 kg (5 lb 2 oz)
5)
The system will automatically enter
Power saving mode when there is no
HDMI connection and no BLUETOOTH
pairing history.
Subwoofer (SA-WCT290/
SA-WCT291)
POWER OUTPUT (reference)
100 W (per channel at 4 ohms, 100 Hz)
Speaker system
Subwoofer system, Bass reflex
Speaker
1
130 mm (5 / in) cone type
8
Power requirements
120 V AC, 60 Hz
Power consumption
On: 15 W
Standby: 0.5 W or less
Dimensions (w/h/d) (approx.)
170 mm × 342 mm × 362 mm
3 1
(6 / in × 13 / in × 14
4 2
(vertical installation)
342 mm × 172 mm × 362 mm
1 7
(13 / in × 6 / in × 14
2 8
(horizontal installation)
Mass (approx.)
6.3 kg (13 lb 15 oz)
Wireless transmitter/
receiver section
Frequency band
2.4 GHz (2.4000 GHz – 2.4835 GHz)
Modulation method
FHSS (Freq Hopping Spread Spectrum)
Design and specifications are subject to
change without notice.
1
/ in)
2
3
/ in)
8
3
/ in)
8
On BLUETOOTH
communication
Supported BLUETOOTH version
and profiles
Profile refers to a standard set of
functions for various BLUETOOTH
product features. See "BLUETOOTH
section" in "Specifications" (page 30) for
the BLUETOOTH version and profiles
supported by this system.
Effective communication range
BLUETOOTH devices should be used
within approximately 10 meters (33 feet)
(unobstructed distance) of each other.
The effective communication range may
become shorter under the following
conditions.
• When a person, metal object, wall or
other obstruction is between the
devices with a BLUETOOTH
connection.
• Locations where a wireless LAN is
installed.
• Around microwave ovens that are in
use.
• Locations where other
electromagnetic waves are generated.
Effects of other devices
BLUETOOTH devices and wireless LAN
(IEEE 802.11b/g) use the same frequency
band (2.4 GHz). When you use
BLUETOOTH device near a device with
wireless LAN capability,
electromagnetic interference may
occur. This could result in lower data
transfer rates, noise, or inability to
connect. If this happens, try the
following remedies:
• Use this system at least 10 meters
(33 feet) away from the wireless LAN
device.
31
US